The high accuracy RAM2L Recording Altimeter for Models flight logger holds up to 32700 altitude readings in its ample RAM capacity, yet is smaller and lighter than all other devices.
This new version is supplied with a standard R/C type plug, so that it can be wired directly to a battery (usually 1 lipo cell), or connected to a received like a RAM2. It will be the customer's responsibility to make up a suitable cable.
- Records altitude and displays it on your PC or PDA.
- Resolution better than 1ft, aided by reading every sample thousands of times.
- Holds up to 9 hours of data when sampling at 1 sample per second.
- Can be set to sample at 1, 2, 5, or 10 samples per second, making it suitable for duration, high performance, and DGL models.
- Use the supplied FlightView PC software to optimise launch altitude, climb speed, and sink rate.
- Suitable for R/C or F/F models, as it doesn't need to be connected to a receiver.
- Operates on a 9V to 3.5V supply, so can be used with a single LiPo cell.
- Only draws 16mA, so a 145mAh LiPo will be enough for approx 9 hours logging.
- Weight = 4.5g
- Connects to your PC or PDA using a supplied serial cable. For PCs without a COM port a USB to Serial converter will be required.
|
|
